How to install a Network License in MasterPlex

Posted on by

This procedure is for the Network license installations only.

MasterPlex Network License Manager Software Installation

  1. If you have not done so yet, download the MasterPlex Network License Manager.
  2. During this installation, please make sure you are logged on as administrator or
    have administrative privileges.
  3. Please make sure that the license server computer is connected to the local area
    network. It is required for proper function of the software.
  4. Please launch MasterPlex Network License Manager 2.0 downloaded from step1 and the InstallShield Wizard will guide you through the installation.

Start the MasterPlex Network License Manager Service

  1. On the Desktop, right-click on the My Computer icon and select Manage.
  2. Double-click Services and Applications and then Services to show the list of
    services.
  3. Right-click on MasterPlex Network License Manager and select Start.Image
  4. Make sure the service status has changed to Started.

Obtain Network License for MasterPlex Software

  1. Launch the MasterPlex Network License Manager and click on the Obtain License button. Press Unblock if the following window appears:
    Image
  2. Select MasterPlex License Manager from the pull-down menu and click Proceed
  3. Please note the Machine ID in this window as it is specific to the computer and is required when requesting for your license file.
  4. Next, please note the Validation Code that is included in the documentation or email when you purchased your software. If you made your purchase online, you will most likely receive your Validation Code via email. Otherwise, your Validation Code will be mailed to you along with the software package.
  5. Once you have your Machine ID and Validation Code squared away, please use our Product Registration Form to request for your license file.
    • License type – Select the Network radio button.
    • # of Concurrent Users – Choose the number of concurrent users based on the number of Validation Codes you have purchased. You will only have to specify 1 Validation Code because they will all be linked in our system
  6. Press the Submit button once you are done and you will receive your license file via email within 1 business day.

Install Network License for MasterPlex Software

  1. Once you receive your license file, save it to your local computer.
  2. Make sure you have Administrative Privileges before proceeding because it will be required for the successful installation of your license file. If you are unsure of the privileges to your user account, please consult with your IT group.
  3. Launch the MasterPlex License Manager.
  4. Click on the Install License button.
  5. Browse to your .lic license file and press Open.
  6. You should now be able to see the license you have just installed in the Installed Licenses table.
    ImageIf the installation is successful, you will see a message saying that the license was successfully installed. If you run into an invalid license error message, please see the following list of some common causes:

    1. Make sure that you have administrative privileges when installing the license. You may need to contact your IT department to ask for assistance with this.
    2. Make sure that the Machine ID originated from the same computer that contains the MasterPlex Network License Manager and not one of the client computers. Also, double check that the machine ID is correct. Note that the “0″ may look like an “O” but there is no letter “O” in the machine ID. Please resubmit for another license if you have reported an incorrect machine ID.
    3. Make sure you have submitted the request for the correct software version. Please resubmit for another license if you have reported an incorrect version number.

Launch Client Software

  1. When an unlicensed version of MasterPlex is initially launched, a user will see the License Information window. If the License Information window does not pop up, you can do the following:
    • For MasterPlex QT v5.x, MasterPlex ReaderFit v2.x, and MasterPlex EX v2.x, go to License->Applications and click on the splashscreen for the application of interest.
    • For MasterPlex QT v4.x, MasterPlex ReaderFit v1.x, and MasterPlex EX v1.x, go to Help/Tools->Applications and click on the splashscreen for the application of interest.Image
    • For MasterPlex CT, MasterPlex GT v2.3 and below, MasterPlex QT v3.0 and below, and MasterPlex QT EX, go to Help->License Information.
      ImageImage
  2. Select Network Client License Mode and click Auto Detect to find the MasterPlex Network License Manager automatically.
  3. If it cannot find the license server automatically, you can manually type in the server information (IP address and port number) and click the Test button.
    Image
  4. To launch the software, press OK.

If you run into any issues launching or finding the MasterPlex Network License Manager, please make sure of the following:

  • The MasterPlex Network License Manager service has been started. (Please see instructions above for Starting the MasterPlex Network License Manager Service.
  • If you are using a firewall, please make sure the following ports have been added to the exceptions list:
    • 12405 (TCP)
    • 12483 (UDP)

    If you have edited the port numbers, please make sure you use your configuration instead.

LinkedInShare

How to export standard curve charts in MasterPlex ReaderFit and MasterPlex QT

Posted on by

There are several ways of exporting standard curve charts in MasterPlex and they are all available under the “Standard Curve” or “Fit Curves” tab:

  1. If you are only interested in exporting a particular standard curve. Make sure it is the active chart and simply right-click on the chart to pull up some export options.Image

    You will then have the option to either copy the image onto a clipboard to paste into a document or presentation or export the image into many different file types such as Bitmap, PNG, HTML, PDF, or Excel.

  2. If you want to export all the standard curves in one report, then click on the Print button Image. Next, select the All radio button and press OK. Once the Preview window pops up, click the Export Document button and numerous export options will appear that include:
    • PDF
    • HTML
    • MHT
    • RTF
    • Excel
    • CSV
    • Text
    • Image

    Image

LinkedInShare

Top 5 reasons why Luminex/Bio-Plex® users prefer MasterPlex® analysis and reporting software

Posted on by

What is MasterPlex?

 MasterPlex is a flexible quality control, curve fitting, graphing and reporting software package for xMAP® quantitative data sets. The MiraiBio group of HITACHI has been offering MasterPlex software as a value-add to the Luminex xMAP and Bio-Rad Bio-Plex systems for 10 years.

 Why would I use MasterPlex?

 1.      You like to tweak your curve fitting settings: MasterPlex is great for labs that want to standardize on one curve fitting model equation (see the section on templates below) but it does really well for users that like to get their “hands dirty”. In fact, MasterPlex has a whole tab dedicated to curve fitting. A user can instantly toggle between fitting curves to the average value of replicates or treat each replicate as an individual point. Any combination of 6 different model equations and 4 optional weighting algorithms can be applied on a per analyte basis or you can choose a custom fit to apply to the entire data set. As a bonus, use the BestFit feature and let MasterPlex choose for you!

 2.      You have advanced reporting or exporting needs: MasterPlex has a very cool drag and drop report builder right in the software. Easily add or remove one of the 21 different available data types to the report. Drill down, Excel-style into your data. Export to PDF, Text, Excel, CSV or HTML. The best part is that you only have to create a custom layout once. Save it in the template manager and reuse it with 1 click!

 For even more advanced reporting needs MasterPlex has an Export Manager that supports multi-sheet Excel reports and various text and XML exporting formats that are often used to import data into a LIMS or data base.

 3.      You want to save time on your analyses: MasterPlex utilizes reusable templates to automate many steps in the analysis process including indicating QC and analysis settings and applying custom report formats. Even a novice user utilizing the template managers can move from data import to final report export in less than 10 seconds!

 4.       You want to standardize on one software package for all of your quantitative data: Most labs are generating quantitative data from multiple platforms. MasterPlex reads data from the following sources:

·         LX/Bio-Plex 100

·         LX/Bio-Plex 200

·         FlexMAP 3D

·         MAGPIX

·         Meso Scale Discovery SECTOR®

·         BioCode

·         Most plate readers

Imagine standardizing not only on one analysis software package but on one report format!

 5.       You want to simplify your training process: MasterPlex has an intuitive tabbed interface that is supported by a number of short, easy to digest videos that can walk any user through analysis. Many labs like the fact that when a new member joins the team it does not take more than 30 minutes to get them trained on MasterPlex. Rather than having to train someone on multiple pieces of analysis software, many MasterPlex labs only have to train once.

 How do I learn more?

 Download a free fully functional 14-day trial today.

 

LinkedInShare

Important announcement that will affect your Luminex bead supply

Posted on by

Please read this important announcement in order to avoid an interruption to your supply of the following products which are related to the Luminex 100/200, Bio-Plex 100/200, MAGPIX and FlexMAP 3D instrumentation:

  • MicroPlex Beads
  • Lumavidin Beads
  • SeroMAP Beads
  • xTAG Beads
  • Calibration Beads
  • Control Beads
  • Luminex 200 Calibration Kit (25 doses)
  • Luminex 200 Performance Verification Kit (25 doses)
  • Automated Maintenance Plate
  • Luminex Sheath Fluid, 1X, 20L

We regret to inform you that Hitachi Solutions America, Ltd. (HISAL) must stop accepting orders for the above mentioned products at 12:00pm PST on December 27th, 2011**. HISAL has the most competitive prices for most of the products affected and due to the long shelf life of some of the products (up to 3 years) you may want to consider purchasing extra inventory at our competitive prices before our distribution rights end.

Please be aware that the product descriptions, part numbers and prices for the affected products will change when you source them from another supplier. You can contact HISAL at info@miraibio.com to receive a matrix that correlates HISAL product descriptions, part numbers and prices to the manufacturer’s respective descriptions, numbers and prices.

We greatly value your business and will do our very best to facilitate the transition to a new supplier of the products affected by this announcement.

Thank you again for your business and loyalty. We look forward to serving you with HISAL products and services in the future.

Regards,

The MiraiBio Group of Hitachi Solutions America, Ltd.

**After December 27th, 2011 we recommend that you purchase these products directly from the manufacturer, Luminex Corporation. In order to facilitate the transition, Luminex Corporation has assigned 2 contacts, Debra Asgari and David Mendoza, to handle any inquiries, process initial orders and communicate the ordering process for ongoing orders:

Debra Asgari – dasgari@luminexcorp.com or 512-381-4386

David Mendoza – dmendoza@luminexcorp.com or 512-381-4302

LinkedInShare

What exactly is “MFI” that is output from Luminex xMAP/Bio-Plex platforms?

Posted on by

The Luminex and Bio-Plex platforms output 2 major pieces of data from an acquisition: MFI and bead count.

Let’s focus on MFI which stands for Median Fluoresence Intensity and NOT Mean Fluorescense Intensity.

Why do we use median and not mean?

Simply put, the median statistic is less sensitive to outliers where there is an inherent carryover of about 0.9% from these instruments. That is one of the reasons why Luminex recommends at least a minimum bead count of 35 to get statistically significant data but 50-100 is strongly suggested.

Here is an oversimplified example of why median is preferred over mean. Let’s say we are running a 1-plex with just 2 samples: A high control (well A1) and a low control (well A2). We have set a minimum bead count of 11. You will see in a second why I chose this odd number (no pun intended).

When we push the Acquisition button on our imaginary instrument, it begins reading well A1 with our high control and reads the following fluorescence intensities of 11 individual beads:

7833, 7609, 8335, 6900, 7354, 7234, 8120, 7777 (jackpot!), 7158, 7982, 7083

To figure out the median value, let’s place these readings in numerical order and the middle reading will be our median value.

6900, 7083, 7158, 7234, 7354, 7609, 7833, 7777 (jackpot!), 7982, 8120, 8335

Since we have an odd number of beads, the median value is simply the middle number which in this case is 7609. If this were an even count, we would have to take the average of the middle 2 readings after they are placed in order but that would just be too much work for me to do for this example. 7609 is the MFI value that this instrument would report for this particular analyte in well A1.

After the instrument reaches the minimum bead count for well A1, it moves on to well A2. (The probe actually goes back down in well A1 and spits out some of the leftover sample plus some additional sheath fluid but there is still a good chance there will be left over beads from A1.) Let’s say our imaginary instrument reports the following fluorescent intensities for A2 (our low control):

8001, 209, 7315, 199, 189, 217, 207, 186, 188, 208, 7917

Let’s place these readings in numerical order to figure out the MFI:

186, 188, 189, 199, 207, 208, 209, 217, 7315, 7917, 8001

The MFI value for the same analyte (we’re only doing a 1-plex) in well A2 is 208. Note though, that we had 3 pretty high readings (7315, 7917, 8001) that were most likely carried over from well A1. 3 out of 11 or 28% carryover is insanely high but I just wanted to illustrate this point that even though we had 28% carryover, we still have a respectable median (or MFI) value of 208 =)

If we used the mean fluorescence intensity, our value would be 2258 which is just bananas!

So in conclusion, the median statistic is preferred over the mean because the median is less sensitive to outliers or beads that are carried over from a previous well.

Thanks for tuning in!

If you have any questions or would like an explanation on other aspects of the Luminex technology feel free to comment below and we’ll try our best to address them!

LinkedInShare

MAGPIX®: xMAP® technology is now more affordable.

Posted on by

Remember when multiplex analysis first emerged?  It changed the way we analyzed data from tedious one-analyte assays to a multiple-analyte analyses in a single run.  Using platforms such as Luminex’s bead based xMAP platform we are able to analyze hundreds of analytes at a time with great sensitivity. However the cost of multiplexing platforms was prohibitive for many labs. With the release of the new lower-cost MAGPIX instrument, which uses Luminex’s MagPlex® magnetic beads, multiplexing has become affordable for many more labs.

 

I stumbled upon an interesting article this week in the Journal of Food Protection titled “Microbead-Based Immunoassay Simultaneous Detection of Shiga Toxins and Isolation of E. coli O157 in Foods”. It shows how the implementation of the xMAP technology has improved the sensitivity of current technology, specifically in detecting food-borne pathogens and toxic markers.  With improved sensitivity and specificity, the article also states that when using the xMAP technology, you can develop rapid and reliable results.

 

How can I get even more value out of the xMAP technology?

Hitachi Solutions America, Ltd. has engineered analysis software called MasterPlex QT to ultimately save you time through its ease-of-use interface while providing versatility of analysis tools and customization of reports.  MasterPlex QT allows MagPlex and/or MAGPIX users to save time by simply selecting the Best Fit curve-fitting button to create the optimum curve fit for your data. This feature automatically selects the optimal model equation and weighting algorithm with different parameters to optimize for: Root Mean Square Error (RMSE), R-Square, or lowest Standard Deviation of % Recovery.

MasterPlex QT’s optimized model equations present accurate and precise curve-fitting from one experiment to the next, offering reliable and reproducible results.

Reporting has not been this easy to do as MasterPlex QT has highly flexible graphing capabilities and a Custom Report Generator, allowing you to create a report that fits your current report templates.

 

This one-two combination of xMAP technology and the power of MasterPlex QT can help you achieve more consistent results in less time.

 

For more tips on optimizing xMAP data analysis, refer to our “Top 10 Tips Luminex/Bio-Plex Data Analysis.”

 

Reference:

Microbead-based immunoassay for simultaneous detection of Shiga toxins and isolation of Escherichia coli O157 in foods. Clotilde LM, Bernard C 4th, Hartman GL, Lau DK, Carter JM. J Food Prot. 2011 Mar; 74(3):373-9.

LinkedInShare

Join us for “MasterPlex QT: One Multiplex Quantitative Analysis Software Solution for Multiple Instruments”

Posted on by

MasterPlex QT: One Multiplex Quantitative Analysis Software Solution for Multiple Instruments

Join us for a Webinar on July 13
Space is limited.
Reserve your Webinar seat now at:
https://www1.gotomeeting.com/register/633947817
Join us for our next webinar, “MasterPlex QT: One Multiplex Quantitative Analysis Software Solution for Multiple Instruments,” on Wednesday July 13th, 11AM to 12PM PST.

In this complimentary webinar hosted by Hitachi Solutions, presenter Robert Lynde will highlight the multi-platform support feature of the MasterPlex Suite.

Streamline all your quantitative analysis needs with one simple software solution.  Whether you’re running a multiplex assay on Luminex, Bio-Plex or MSD, let MasterPlex QT be your one-stop-shop for powerful analysis and flexible reporting with features that allow cross-plate and even cross-platform data analyses.  

This webinar will take you through a demonstration of the power of MasterPlex QT.  Topics include:

• Data importing

• Setting up the plate

• Virtual plate

• Quality Control Manager

• Best Fit

• Viewing & exporting results

Instrument compatibility for MasterPlex QT:

• Luminex 100 (LX100)

• Luminex 200 (LX200)

• Bio-Plex 100

• Bio-Plex 200

• FlexMAP 3D

• MAGPIX

• LiquiChip 200 Workstation

• SECTOR Imager 6000 (MSD)

• SECTOR Imager 2400 (MSD)

• SECTOR PR 400 (MSD)

• SECTOR PR 100 (MSD)
Title: MasterPlex QT: One Multiplex Quantitative Analysis Software Solution for Multiple Instruments
Date: Wednesday, July 13, 2011
Time: 11:00 AM – 12:00 PM PDT
After registering you will receive a confirmation email containing information about joining the Webinar.
System Requirements
PC-based attendees
Required: Windows® 7, Vista, XP or 2003 Server
Macintosh®-based attendees
Required: Mac OS® X 10.5 or newer


LinkedInShare

Should you convert your LX100/200 control software to xPONENT v3.1?

Posted on by

Now through the end of June 2011 you can upgrade ANY LX100/200 control software to xPONENT v3.1 for $875.00*. This includes the software, Automated Maintenance Plate (AMP), and calibration and verification beads.

Why are you telling me this?

Today Hitachi Solutions America, Ltd. (HISAL) announced the discontinuation of MasterPlex CT, its control software for the LX100/200 instrument from Luminex Corp. This announcement adds to the list of discontinued control software out in the market: LDS 1.7, IS 2.x, IS 2.3 (as of June 30, 2011), MasterPlex CT, StarStation etc.

I have one of the discontinued software packages you mentioned. Should I convert to xPONENT v3.1?

Well firstly, if it isn’t broke, don’t fix it. Luminex will continue to support IS 2.3 for 5 more years. (Please check with Luminex Corporation for support information on control software older than IS 2.3.) HISAL will support CT through the end of 2011 and all of the support resources will remain online after that point. If these software interfaces are working for you and you don’t intend to change the way you use your LX100/200 then it is probably not necessary to make any changes.

There are 2 main reasons you may want to consider converting to xPONENT v3.1:

  1. Automating the calibration, verification and maintenance of your LX100/200
  2. Adding support for magnetic microspheres

If you currently use MasterPlex CT you already have the features mentioned in 1 and 2 above. So converting may not be as compelling to you. However if you are currently using LDS 1.7, IS 2.x, IS 2.3 or StarStation you cannot run assays with magnetic microspheres and you do not have automated maintenance capabilities. If you plan to add those capabilities to your usage of your LX100/200 then now is a great time to consider converting due to the steep discount in the conversion cost through the end of June.

Feel free to contact us if you have any questions info@miraibio.com.

*Please note that depending on the age of your XY Platform and computer you may need to upgrade one or both of these items in order to support xPONENT v3.1. Any costs related to upgrading your computer or XY Platform would be in addition to the $875.00. Also if you convert from any version of Bio-Plex Manager to xPONENT v3.1 an onsite service visit will be require in order to adjust the PMTs. This visit is not included in the $875.00.

xPONENT v3.1 required computer specs:

  • Windows XP Professional, SP3
  • 1.86 GHz Intel Core 2 or higher
  • 2 G RAM or higher
  • 80 GB hard drive
  • DVD drive
  • 1280 x 1024, 32 bit screen

XY Platform requirements

  • Please contact us for help in determining the compatibility of your XY Platform and xPONENT v3.1 at info@miraibio.com.

-The MiraiBio Team

LinkedInShare

Discontinuation of MasterPlex CT v1.x

Posted on by

Hitachi Solutions America, Ltd. (HISAL) will discontinue MasterPlex CT v1.0 and v1.2, control software for the LX100/200 instrument manufactured by Luminex Corp., on July 5th, 2011.  Due to the changing market conditions, we feel this change will best serve our customers in the long run.

Please note HISAL is NOT discontinuing MasterPlex QT (v3.0 and higher), MasterPlex EX (v1.0 and higher) and MasterPlex GT v2.3. These analysis packages for the Luminex/Bio-Plex/MSD platforms will continue to be developed, supported and sold since they are independent of the platform.

Current users of the above mentioned versions of MasterPlex CT will be able to continue to use these products and receive technical support from the MiraiBio Group of HISAL until December 31st, 2011. After December 31st, 2011 HISAL will terminate public and technical support for all versions of MasterPlex CT. Users can still use MasterPlex CT after that date and existing support documents and content will continue to be available on the MiraiBio Group website.

What are my options if I want to continue to use the Luminex 100/200 platform?

1)      Continue to use MasterPlex CT – MasterPlex CT is still a viable option for Luminex 100/200 instrument control and even supports Luminex’s latest version of magnetic microspheres. HISAL will continue to support MasterPlex CT until December, 31st 2011.

2)      Convert your LX100/200 control software to xPONENT v3.1 – Luminex Corp. has its own current version of control software that includes an Automated Maintenance Plate and will be fully supported by Luminex Corp. Click here if you want to learn more about converting to xPONENT v3.1.

Please contact info@miraibio.com if you have any questions about this announcement.

-The MiraiBio Team

LinkedInShare